Oil Catch Can Drain Line Kit by UPR
This can be installed in any UPR Catch Cans that have a hole in the bottom with a plug or this can be connected directly to an existing UPR 1/4 Turn Drain Valve.
Designed to work with all Catch Cans with a 1/4 Inch Drain Plug Hole. We’ve included both a 90 deg and 180 deg fitting to be able to work with the tightest mounting locations that require a quick bend out of the catch can due to limited mounting space and a straight fitting to be able to drop it straight down.
Our kit only allows you to remote mount the drain valve and be able to empty your catch can on the fly without going under the hood or having to remove anything. Simply slide a bucket or drain pan under your car and open the drain valve and your all set.
No cheap rubber hoses or generic hose clamps in this kit only UPR Nickel Fittings, UPR Chrome Drain Valve, UPR Braided Hose, with UPR Billet Hose Ends for a perfect no-slip fit that will last a lifetime.
Features
- 1/4 Turn Drain Valve
- 1/2in Braided Oil Resistant 300psi Hose
- Works with ALL Catch Cans with a 1/4 Inch Drain Plug in the bottom
Simple Installation: Simply remove the drain plug from the bottom of the can, install the catch can to barb fitting, then install the hose and cut to desired length followed by the drain valve.
Applications
- Catch Cans with 1/4″ Drain Plug
What’s In The Box?
- 2 – UPR Billet Hose End Covers
- 1 – 1/4 Turn Drain Valve with 14mm Barbed End
- 1 – 90 Degree 14mm Barb x 1/4″ Catch Can Fitting
- 1 – 180 Degree 14mm Barb x 1/4″ Catch Can Fitting
- 1 – 48″ 1/2″ UPR Braided Hose – 300psi Oil Resistant
Warranty
- Manufacturer Standard Warranty
