Performance Intercooler Kit for the 2016+ Chevrolet Camaro 2.0T and 2013+ Cadillac ATS 2.0T by Mishimoto
It’s time to give the intercooling system in your 2016+ Chevrolet Camaro 2.0T or 2013+ Cadillac ATS a complete overhaul with the Mishimoto Performance Intercooler Kit.
Our bar-and-plate constructed core picks up the slack from the stock unit by offering increased heat rejection characteristics, as well as a boost in airflow. On top of the new construction, our design increases the internal core volume by 45%, and offers a whopping 239% gain in external fin surface area, making sure that the charged air running through your LTG is as chilled as possible.
Our kit also includes a set of our mandrel-bent intercooler piping featuring a range of 2.25-2.75” diameters equating in a 30% increase in volume and 10% better flow of the charged air. All together, our piping kit gits your LTG powered Camaro or ATS up to 11 additional horsepower and 9 ft-lbs of torque. We have also included a pre-welded NPT port on the cold side piping that not only allows for easy installation of your stock equipment, but also adding an aftermarket boost gauge or meth injection is a breeze.
The Mishimoto Performance Intercooler Kit for your 2013+ ATS or 2016+ Camaro is available with your choice of polished or wrinkle black piping, and as always this kit is covered under the Mishimoto Lifetime Warranty.
Features
- Direct fit for the 2016+ Chevrolet Camaro 2.0T and 2013+ Cadillac ATS 2.0T
- 2″ thick intercooler design optimized for maximum airflow with minimal pressure drop
- 45% increase in internal core volume & 239% increase in external fin surface area
- 78% increase in core size
- Cast end tanks with internal air diverter provide optimal airflow through intercooler
- 30% greater internal volume and 10% increased flow over stock
- Utilizes stock quick-disconnect fittings for easy installation
- Pre-welded NPT port on cold-side pipe allows for quick install of aftermarket meth injection or boost gauge
- Piping available in polished and wrinkle black
- Mishimoto Lifetime Warranty
Please Note: There is an O-ring inside of the stock intercooler pipe on the end that connects to the intercooler. This O-ring must be removed and installed into your Mishimoto intercooler pipe.
Applications
- 2016+ Chevrolet Camaro 2.0T
- 2013+ Cadillac ATS 2.0T
Specifications
- Core Size: 21.65″ x 17.15″ x 2.09″
- Inlet Size: 2.40″
- Outlet Size: 2.40″
- Pipe Diameter: 2.25″/2.5″/2.75″
- Max HP: 450
What’s In The Box?
- 1 – Aluminum Intercooler
- 2 – Aluminum Pipes w/ quick-disconnects
- 1 – Aluminum Pipe w/ 2-bolt flange
- 2 – Quick-Disconnect Spring Clips
- 1 – 2.75″ 90° Silicone Coupler
- 1 – 2.25″ to 2.5″ Silicone Transition Coupler
- 1 – 2.5″ T-Bolt Clamp
- 1 – 2.75″ T-Bolt Clamp
- 2 – 3″ T-Bolt Clamps
- 3 – Tree Clips
- Mishimoto Lifetime Warranty
References
- Installation Instructions
Warranty
- Mishimoto Lifetime Warranty
